Faits marquants 2008

08 mars 2008
D. Sen, O. Spalla, O. Taché, P. Haltebourg, A. Thill

ESRF Highlights 2007

The synthesis of ordered, homogeneous porous grains is an expanding area of materials research. One strategy for their formation is to dry the spray of a complex mixture containing nanoparticles and templating agents [1]. In this process, a continuous flow of micrometric droplets, made from the initial dilute solution, is dried along a hot tube in order to evaporate the solvent. Self-organisation of the constituents takes place during the evaporation. Organic moieties can even be removed via further calcination. The local structure of the final grains strongly depends on the initial compositions. Small-angle X-ray scattering can be used to investigate the ordered structural features of the final spray-dried grains at the nanometric scale [2]. However, the morphology of the grains at a larger scale depends critically on the kinetics of drying.

Two different regimes may be distinguished for the solvent evaporation from a complex nanoparticles solution confined in a droplet. Firstly, when the evaporation front moves faster than the time required for a particle to diffuse on the length scale of the drop, the grains may be heterogeneous. The final grains can be doughnut-like or even core-shell with an empty space inside, which has sometimes been observed by scanning electron microscopy (SEM). Secondly, when the drying is slower than the characteristic diffusion time of the nanoparticles, the evaporation occurs in a quasi equilibrium distribution of the nanoparticles inside the droplet and the formation of a dense spherical grain is anticipated.

For a solution containing a mixture of 5 nm silica nanoparticles with 50 nm polybromostyrene sulfonate we found that a large proportion of doughnuts were obtained, even when a slow evaporation rate was used (Peclet number Pe = dif/evap = 0.01). One of the doughnuts is shown Figure 59. Together with the sphere-doughnut transition, the inner homogeneity of this type of material remains a crucial question for their further applications.

08 mars 2008
J. Pignat, J. Daillant, S. Cantin, F. Perrot, O. Konovalov

ESRF Highlights 2007

Langmuir films of long chain amphiphiles at the air-water interface present different phases depending on temperature and surface pressure (the difference between the surface tension of pure water and the actual surface tension in presence of the film = H20). Their phase transitions were first identified by isotherm measurements (surface pressure as a function of molecular area for a fixed temperature). The first grazing-incidence X-ray diffraction (GIXD) experiments carried out directly on monolayers at the air-water interface were reported in 1987 [1]. GIXD has now become the primary technique used to determine the structure of amphiphilic monolayers on water, allowing the determination of unit cell parameters, molecular tilt angle and azimuth of tilt direction. It is however generally considered that going beyond this simple unit cell characterisation is impossible.

08 mars 2008
V. Padmanabhan, J. Daillant, L. Belloni, S. Mora, M. Alba, and O. Konovalov

ESRF Highlights 2007

The study of aqueous salt solutions continues to attract various research groups because of their fundamental importance in various physicochemical, biological and atmospheric processes. The air/water interface plays a crucial role in such processes and differs to a large extent when compared to bulk. To further understand the role of the interface, direct access to the surface excess or the knowledge of the concentration profiles of ions will not only improve our present understanding but also help to predict the properties associated with it. Ions, though of the same valency, tend to interact differently with proteins (salting in or salting out as predicted by Hofmeister) or differ in their degree of adsorption at the air-water interface. In recent times, there have been considerable efforts by various research groups using different sophisticated surface sensitive probes to understand the organisation of the ions and its impact on the solvent features and also through molecular dynamic simulation.

30 juillet 2008
Authors: D.J. Marion, G. Huber, P. Berthault, H. Desvaux

Liquid-state NMR is a very powerful method for chemical analysis but it suffers from inherent low sensitivity due to the weak involved energies, which leads to small thermal equilibrium polarization. A solution consists in resorting to transiently polarized nuclear spin systems such as those prepared by optical pumping or dynamic nuclear polarization. Nevertheless, the direct extension of the whole liquid-state NMR techniques to these systems might be less straightforward than anticipated. Indeed their nuclear magnetization can easily be on the same order of magnitude or much larger than that of bulk water in high field. For such high magnetization levels, the usual framework of NMR fails to describe the collective spin dynamics which appears [1]. It originates from the non-linear coupling between the magnetization and the detecting coil (radiation damping) and from the massive long distance dipolar couplings between the nuclear spins.

In this field, we have observed and characterized a new and unexpected phenomenon. The magnetization of dissolved hyperpolarized 129Xe is first prepared in its unstable state (negative xenon spin temperature) by the optical pumping process. When put in the high field NMR magnet, without rf excitation, the system spontaneously emits a series of rf bursts instead of one, as expected by the usual theory of radiation damping. We have experimentally shown that this also induces inhomogeneous spatial organization of the 129Xe magnetization. Even if it appears possible, by numerical simulations, to reproduce one emission leading to inhomogeneous spatial magnetization, a series seems to be impossible to obtain in the framework of a classical dipolar field. We have been able to prove that these multiple maser emissions are triggered by noise but the origin of the chaos remains unclear. Even if many elements indicate the main influence of long distance dipolar fields, in particular through the appearance of frequency beats or of very narrow lines, the chaos might also be due to the non-linearity of the Bloch-Maxwell equations as in chaotic laser at quasi-optical wave lengths.

A practical technical consequence of this research was the finding of a new tuning approach which allows an increase of NMR sensitivity valid for any nuclear spin system [3].

This work is supported by the French Ministry of research, ANR Blanche DIPOL).

[1] J. Jeener, in Encyclopedia of NMR, 9 (Eds.: D. M. Grant, R. K. Harris), Wiley, (2002), pp. 642-679.

[2] D. J. Marion, G. Huber, P. Berthault, H. Desvaux, ChemPhysChem, 9, 1395-1401 (2008).

(3] D. J. Marion, H. Desvaux, J. Magn. Reson., 193, 153-157 (2008).



Retour en haut